Class 150 Hard Seal Cast Gate Valve Ductile Iron Valve Body High Precision

American Standard hard seal steel gate valve gate valve class 150

Ductile Iron Hard Sealed Open Rod Gate Valve

Type: gate valve

Sealing: Brass

Valve Body: Ductile Iron

Design standard: ANSI B16.10

Flange drilling: ANSI B16.1

Work pressure: 125LB/150LB

Surface treatment: blue spray

Size: 1.5"-24"

When open-stem gate valve closes, the sealing surface can be sealed only by medium pressure, that is, only by medium pressure to press the sealing surface of the gate to the seat on the other side to ensure the sealing surface, which is self-sealing. Most gate valves are forced to seal, that is, when the valve closes, the gate must be forced to the seat by external force to ensure the sealing surface.

The gate has two sealing surfaces. The two sealing surfaces of the most commonly used mode gate valves form wedges. The wedge angle varies with the valve parameters, usually 50, and the medium temperature is 2 52'. Wedge gate valve can be made into a whole, called rigid gate; it can also be made into a gate that can produce slight deformation to improve its workability and make up for the deviation of sealing surface angle in the process of processing. This kind of gate is called elastic gate.

The types of open bar gate valves can be divided into wedge gate valves and parallel gate valves according to the configuration of sealing surface. Wedge gate valves can be divided into single gate type, double gate type and elastic gate type. Parallel gate valves can be divided into single gate type and double gate type. According to the threaded position of the valve stem, it can be divided into two kinds: open stem gate valve and dark stem gate valve.

When open-stem gate valve closes, the sealing surface can be sealed only by medium pressure, that is, only by medium pressure to press the sealing surface of the gate to the seat on the other side to ensure the sealing surface, which is self-sealing. Most gate valves are forced to seal, that is, when the valve closes, the gate must be forced to the seat by external force to ensure the sealing surface.