Payment & Shipping Terms:
|Size：:||NPS 2"~48"||Pressure Rating：:||Class 150~300|
|Material：:||WCB, LCB, WC6, WC9, C12,CF8, CF8M, CF3,CF3M,etc||Temperature：:||-196°~593°|
|Design & Manufacturing Standard：:||API 600, BS 1414, ASME B16.34||Face To Face：:||ASME B16.10, API 6D, BSEN 558|
|End Connection：:||ASME B16.5, ASNE B16.47, BSEN 1092||Operation Method：:||Manual ,Worm Gear, Electric Actuator, Pneumatic Actuator|
Feature for Soft seal gate valve
Integrally rubber-wrapped valvecore, fullywrapped design internally placed highstrength frame, imported rubber glue,anticorrosion
The valve body is made by high -precise cast with an accurate geometric dimension and can guaarantee the seal property without any fin-ishing.
Flat-bottom designed valve body, never get blocked up,Doubleline seal design makes close more completely without any leakage
Special up-seal design makes noneed of stuffing,extremely small frictional resistance and replaceable seal withoutcutting water off
Floating design makes the valve core's positioning accirately and automatically adjustable, the operation torque light and replacement convenient.
Exquisite structure makes both installation-and service easy without maintenance and theself-pressed seal is suitable foran adverse working condition.
Humanized design makes a good operation touch, easy operation, without foreign matter's being detained and extremely small pressure loss.
Advantage for the gate valve
All of the gate valve are full bore,so they have the very small fluid resistance and the sealing face is very resistant to shock and wear.
The flow of medium is not restricted when valves are installed in the pipeline.they have simple structure and have the short face to face.so the price is lower than ball valve.
Matters needing attention during installation
The workers must clean up the impurities in the piping and valves before the gate valve installed on the piping line.