Payment & Shipping Terms:
|Size：:||NPS 1/2"~12"||Pressure Rating：:||Class 150~1500|
|Material：:||CF8M, CF3,LF2, CN7M, CF8CWCB, LCB, WC6, WC9, C12, C5, CF8, CF8M, CF3, CF3M||Design & Manufacturing Standard：:||BS 1873 ,ASME B16.34, API 600|
|Face To Face：:||ASME B16.10||Flanged Dimenson：:||ASME B16.5, ASME B16.47, BSEN 1092|
|End Connection：:||ASME B16.25BSEN 558, ASME B16.5 ,BSEN 1092||Operation Method：:||Manual ,Worm Gear, Electric Actuator, Pneumatic Actuator|
carbon steel globe valve,
rising stem globe valve
1/2"-12" CL150-1500 Cryogenic cast globe valve, OS&Y, BB, Extend Rising stem
|Pressure Rating:||Class 150~800|
|Material:||LCB, LCC, CF8, CF8M, LC3, LF2, LF3, F304, F316|
|Design & Manufacturing Standard:||BS 1873 ,ASME B16.34, AOU602, BS 5352|
|Face to Face:||ASME B16.5, EN558|
|Flanged Dimenson:||ASME B16.5(BSEN 1092)|
|Butt Weld Dimensin:||ASME B16.25|
|Threaded end Dimension:||ASME B1.20.1|
|Socketweld dimension:||ASME B16.11|
|Test and Inspection:||API 598, BS 6364|
|Operation Method:||Manual ,Worm Gear, Electric Actuator,
APPLICATION & FUNCTION
Globe valves are primarily used as control valves where throttling or both throttling and shut-off are required. Globe valves can also be used for on-off service; however, because of the design, a pressure drop becomes inherent. This is generally confined to on-off applications where the valve is normally closed and pressure drop is not important when the valve is open. Normal applications will find the globe valve with the flow and
pressure under the disc. Kelite cast steel globe valves are commonly made in outside screw and yoke designs with full ports (including seat ring) and heavy-duty, conical plug type discs.
BODY & BONNET
The body is full ported and spherical in form. The design utilizes large radiuses which allow for the stresses, flow resistance and turbulence to be kept to a minimum. Valve bonnets are equipped with a backseat bushing.
The valve is normally supplied with the conical plug type disc. The disc rotates freely on the stem and incorporates a differential angle from that on the seat ring. This design provides the maximum assurance of shut off, is less likely to stick in the body seat, and is considered the simplest design for field repair. The disc is held onto the stem utilizing the disc nut and a split-ring disc retainer on 2”–4” in pressure classes 150 and 300.
Larger sizes as well as pressure classes 600 and higher utilize the disc nut and a button head design which is integral with the stem. Bottom guided discs are available.
Seat rings are designed to greatly reduce and/or prevent any turbulence and avoid damages due to corrosion. The seat rings are forged or rolled in one piece and then seal welded and overlaid, if required. After welding and all required heat treating, the seat ring faces are machined, thoroughly cleaned and inspected before leaving for assembly.
As Kelite’s standard, all stems are rotating and rising; however, a non-rotating design is available when specified by the customer. The accuracy in the dimensions and finishes assure a long life with a perfect tightness in the packing area, resulting in lower fugitive emissions. All of our stems are designed with integral backseat features which provide an ultimate seal during packing changes.
The depth of the stuffing box allows for a sufficient amount of packing, which makes the stem seal. GWC’s standard packing arrangement and stuffing box design meets<100 ppm fugitive emission requirements. If specified in the purchase order, lantern rings and/or grease injectors can be
The stem packing is designed and arranged to ensure a maximum seal along the stem during operation or while at position, thus allowing for a greater reduction in fugitive emissions. Our packings are of nonasbestos types.
Kelite Valve can supply any style of packing required by the customer.
The packing gland design is a two-piece self-aligning type. The packing gland has a spherical head that rides within the spherical joint of the gland flange. The packing gland has a shoulder, which restricts the complete entry into the stuffing box bore. This particular design assures a straight compression of the packing as the gland eyebolts are being equally adjusted, without injuring the stem.
The stem nuts on KELITE’s standard rising stem globe valves are threaded into the top of the yoke where they are secured with a ack weld.
Handwheels are designed with a comfortable grip for easy operation. Our valves are also available with gearing, motor actuators or cylinder actuators for the more demanding services.
BOLTS AND NUTS
For normal service conditions, ASTM A194 Class 2H and ASTM A193 Grade B7 nuts and stud bolts are furnished. If specified for high temperature service conditions, ASTM A194 Class 4 and ASTM A193 Grade B16 nuts and stud bolts are furnished. Standard bolting furnished for our stainless steel valves consists of ASTM A194 Class 8 and ASTM A193 Grade B8 nuts and stud bolts.
Kelite Valve can supply any bolting as requested by the customer.
Our standard production covers valves with:
• Flange ends with Raised Face (RF), Flat Face (FF) or Ring Type Joint (RTJ) that conform to B16.5.
• Butt-welding ends (BW) that conform to B16.25.
• All face-to-face/end-to-end dimensions conform to B16.10.
• Other special end connections are supplied according to customer’s requirements.
Accessories such as gear operators, actuators, bypasses, locking devices, chainwheels, extended stems and bonnets for cryogenic service and many others are available to meet the customers requirements.
Valve Test: 100% quality tested before delivery
Valve Guarantee: 18 months after shipments or 12 months after installed
Valve Delivery: 30 days
Valve Sample: Sample Available by Kelite Valve
Valve Color: Customer request
Valve Packing: Plywood Case for Bellow Globe Valve
MOQ: 1 Set
Valve Certificate: API 6D,CE1521,PED Model H 2014/68/EU,ISO9001:2008,ISO14001,CU-TR 010/032 ,EAC
Place of Origin: Zhejiang, China (Mainland)
Delivery Detail: Shipped after payment
Payment Terms: L/C,D/A,D/P,T/T, Western Union